Gate Valves
Full-bore isolation with near-zero pressure drop. CI, CS, bronze and forged steel, 15–300 mm, PN10 to Class 800.
View details & sizesIndustrial Valves
Industrial Valves — Dealer & Stockist in Delhi
We stock the full working range of industrial valves for Indian plant and building services: cast iron and cast steel for water and process lines, bronze and gunmetal for potable water, forged steel for steam and high pressure, and stainless steel where corrosion or hygiene rules. Sizes from 15 mm to 600 mm, PN10 through to Class 800, with IBR and UL/FM certified options where the application demands it.
Ball Valves
Quarter-turn, bubble-tight shut-off. One, two and three piece in SS 304/316, CS, brass. 15–200 mm.
View details & sizes
Butterfly Valves
Compact and light for large lines. Wafer and lugged, EPDM/Nitrile/PTFE liner, 50–600 mm.
View details & sizes
Non Return Valves
Swing, lift, dual plate and ball check. Stop reverse flow and control water hammer. 15–400 mm.
View details & sizes
Globe Valves
The right valve for throttling and steam regulation. Forged and cast steel, Class 150–800.
View details & sizes
Y-Strainers
Protect pumps, meters and control valves from scale and debris. SS/CI/CS, 20–200 mesh.
View details & sizesProduct Range
Products in this category
Sizes, pressure ratings and standards at a glance.
Why no prices are shown. Brand list prices are revised periodically and the discount that applies depends on your quantity, so a figure printed here would be neither current nor yours. Send your item list and you will have written rates, GST and freight the same working day.
Gate Valves — CI, CS, Bronze & Forged
15MM – 300MMPN10 – Class 800IS 14846 / IS 778
Rate on request — sizes and class confirmed on enquiry
See details & pricingBall Valves — SS 304/316, CS & Brass
15MM – 200MMClass 150 – 8001, 2 & 3 Piece
Rate on request — sizes and class confirmed on enquiry
See details & pricingButterfly Valves — Wafer & Lugged
50MM – 600MMPN10 – PN25IS 13095 ISI
Rate on request — sizes and class confirmed on enquiry
See details & pricingNon Return / Check Valves
15MM – 400MMPN16 – Class 800IS 5312 / API 594
Rate on request — sizes and class confirmed on enquiry
See details & pricingGlobe Valves — Throttling & Steam
15MM – 200MMClass 150 – 800IBR Options
Rate on request — sizes and class confirmed on enquiry
See details & pricingY-Strainers & Pot Strainers
15MM – 300MMPN16 – Class 80020 – 200 Mesh
Rate on request — sizes and class confirmed on enquiry
See details & pricingPlug Valves — Lubricated & Sleeved
15MM – 600MMClass 150 – 600Tar & Slurry Duty
Rate on request — sizes and class confirmed on enquiry
See details & pricingKnife Gate Valves — Slurry & Effluent
50MM – 600MMPN10CI & SS 316
Rate on request — sizes and class confirmed on enquiry
See details & pricingBalancing Valves — HVAC
15MM – 300MMPN16 / PN20With Test Points
Rate on request — sizes and class confirmed on enquiry
See details & pricingSub-Categories
Browse by brand or product
By brand
Sant Butterfly ValvesSantSant Bronze & Gunmetal ValvesSantSant IBR Approved ValvesSantSant Forged Steel ValvesSantZoloto Bronze ValvesZolotoZoloto Forged Steel ValvesZolotoKartar CI Sluice & Reflux ValvesKartarL&T Ball ValvesL&TAudco Lubricated Plug ValvesAudcoAdvance Dual Plate Check ValvesAdvanceVeeson SS Ball ValvesVeesonKnife Gate ValvesAdvance
More in this category
Choosing the right valve — the short version
Most costly valve mistakes come from using an isolation valve for control duty, or paying for a premium valve where a general-purpose one would do. As a rough guide:
| Your requirement | Valve type to ask for |
|---|---|
| On/off isolation, large line | Butterfly valve — cheapest and lightest above 150 mm |
| On/off isolation, small line | Ball valve — instant, tight shut-off up to 150 mm |
| On/off, slurry or high temperature | Gate valve — tolerates solids, full bore when open |
| Regulating or throttling flow | Globe valve, or butterfly for HVAC balancing |
| Preventing reverse flow | Dual plate check valve on pump discharge; swing check on gravity lines |
| Protecting downstream equipment | Y-strainer or basket strainer, mesh matched to the equipment |
Send us your valve list
Include size, class, body material, end connection and brand if specified — or just send the drawing and we will work it out.
Frequently Asked Questions
Which valve brands do you stock in Delhi?
Sant, Zoloto, Kartar, L&T Valves, Audco, Advance Valves and Veeson as our regular lines, plus Lifeguard and Newage for fire fighting products. If your specification names a brand we do not normally hold, we can usually source it against order — tell us the delivery date you need.
Do you supply actuated valves?
Yes. We supply valves with ISO 5211 mounting pads fitted with pneumatic double-acting or spring-return actuators, or electric actuators with limit switches and, if required, positioners and solenoid valves. Assemblies are bench tested before dispatch.
What documents come with an industrial valve?
As standard: the manufacturer's test certificate showing hydrostatic body and seat test results, material grade, and warranty. On request and where applicable: IBR Form III-C, ISI licence details, UL/FM listing certificate, third-party inspection release note and material traceability to heat number.
Need a price today?
Send us your BOQ, drawing or item list on WhatsApp and get a written quotation the same working day. Ready stock for most sizes at our Delhi godown.